[. . . ] Safety Instructions To avoid the risk of accidents and injuries: · Never put your hand into the openings of the appliance. Do not insert any objects through the openings ­ except for the appropriate stodger and the foodstuff to be processed. Always unplug the appliance after use or during breaks in order to avoid it from being turned on accidentally. [. . . ] Now you can take out the grater funnel. e) Fixing the shortbread cookie attachments Once the meat grinder has been assembled as described under a): · · · Turn open the ring clamp take out the cutting disc cross blade . and the · d) Fixing the grater and cutter attachments When the meat grinder has been removed from the motor block: · First select the appropriate attachment. , Remove the pattern strips from the shortbread cookie attachment and . . . Insert both the edges of the shortbread cookie attachment into the slots in the mincer casing ¹. · - a cutter attachment · Fix the grater or cutter attachment in the provided round recesses in the grater funnel. Place the grater funnel in the motor block in such a way that the arrow of the grater funnel points to the symbol "open". Press in the grater funnel lightly and turn it upwards till it is in a vertical position. · · When everything has been attached correctly, screw on the ring clamp tightly and . . . once again attach the pattern strips to the front part of the shortbread cookie attachment. To remove you must again remove the pattern strip first, before turning open the ring clamp and taking out the shortbread cookie attachment . · · 6 6. Operation Attention: In the case of foods, which need to be processed at high speeds, the appliance should not be run for longer than 10 seconds (!) at a stretch. Let there be a break of 30 seconds before switching it on again, to prevent the motor from overheating. One can tell that the machine is being overused when the sound of the motor changes and slows down. a) Operating the appliance Once the appropriate attachments have been fixed: · Place the appliance in such a way that it is absolutely stable and cannot fall off the table or into water (due to vibrations or if it gets caught in the cable). Warning: Never touch a machine, which is plugged in or is operational when it happens to fall or land in water ­ or in the case of other emergencies!· Place the food, which is to be processed in the feeding tray and place a vessel to collect the processed food in front under the opening. 6. Operation · First press the OFF button, to ensure that the appliance is off. · Now push in the food with the round or square stodger in the feeding tube - never with one's fingers, forks, spoons or similar objects. [. . . ] If it still does not function at the end of this period, this indicates a technical problem. GB · If themains cable is damaged or or the accessories are visibly damaged: · · · Switch off the device by pressing the OFF button!Get the parts be repaired by customer service, before reusing the appliance again. Warning: Never open the casing of the motor block­ There are no operating parts to be found there. [. . . ]